Audio-Technica Pro 45 Cardioid Condenser

Audio-Technica Pro 45 Cardioid Condenser Image
  • Hi-SPL handling is perfect for suspension over choirs and orchestras
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Self-contained electronics eliminate need for external power modules
  • Flat, smooth frequency response
  • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
  • Also available in White as PRO 45W
  • AT8146 windscreen; steel hanger included with this microphone
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 70 -16,000 Hz
  • Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): 106 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio: 66 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 9-52V DC, 2 mA typical
  • Weight: 0.5 oz (15 g)
  • Dimensions: 2.24 inches (56.9 mm) long, 0.47 inches (12.0 mm) head diameter
  • Output Connector: 3-pin XLRM-type on cable
  • Cable: 25 ft (7.6 m) long, permanently attached

Audio-Technica Pro 45 Cardioid Condenser

Audio-Technica Pro 45 Cardioid Condenser Image
  • Hi-SPL handling is perfect for suspension over choirs and orchestras
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Self-contained electronics eliminate need for external power modules
  • Flat, smooth frequency response
  • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
  • Also available in White as PRO 45W
  • AT8146 windscreen; steel hanger included with this microphone
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 70 -16,000 Hz
  • Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): 106 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio: 66 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 9-52V DC, 2 mA typical
  • Weight: 0.5 oz (15 g)
  • Dimensions: 2.24 inches (56.9 mm) long, 0.47 inches (12.0 mm) head diameter
  • Output Connector: 3-pin XLRM-type on cable
  • Cable: 25 ft (7.6 m) long, permanently attached